Home / Blog / Telescopic vs Non-Telescopic Slabs in KSEB Tariff: Why One Unit Can Cost You ₹300

Telescopic vs Non-Telescopic Slabs in KSEB Tariff: Why One Unit Can Cost You ₹300

Ask ten people in Kerala how their KSEB bill is calculated and most will say “the more you use, the higher the rate.” That is true, but it leaves out the part that matters most. KSEB does not use one slab method. It uses two, and which one applies to you depends on a single number: your average monthly units. If you do not know which side of that line you are on, you can end up paying hundreds of rupees more for almost the same usage.

This article explains both methods in plain terms, with the current rates (valid until 31 March 2027) and worked examples.

First, which units count?

KSEB usually bills every two months. But the slab is decided on the monthly average, which is your total units divided by two. If your bill shows 480 units, KSEB treats it as 240 units a month. If it shows 520, that is 260 a month. The magic number is 250 units a month, or 500 units on a two-month bill.

Telescopic slabs: up to 250 units a month

In the telescopic method, your usage is split into blocks, and each block is charged at its own rate. The first 50 units are cheap, the next 50 cost a bit more, and so on. Only the units that fall inside a block are charged at that block’s rate.

Monthly units Rate per unit Fixed charge (single phase) Fixed charge (three phase)
First 50 ₹3.35 ₹50 ₹130
51 to 100 ₹4.25 ₹85 ₹175
101 to 150 ₹5.35 ₹105 ₹205
151 to 200 ₹7.20 ₹140 ₹215
201 to 250 ₹8.50 ₹160 ₹235

The fixed charge is not split in blocks. It is decided by the highest slab you reach. If you use 120 units, you pay the energy charge block by block, plus the ₹105 fixed charge for the 101 to 150 slab.

Example: 120 units in a month (single phase):

  • 50 × ₹3.35 = ₹167.50
  • 50 × ₹4.25 = ₹212.50
  • 20 × ₹5.35 = ₹107.00
  • Energy charge: ₹487.00, plus ₹105 fixed = ₹592.00

Non-telescopic slabs: above 250 units a month

Once your monthly average goes over 250, the blocks disappear. KSEB finds the band your total falls in and charges that one rate on every single unit, starting from the first.

Monthly units Rate on all units Fixed charge (single phase) Fixed charge (three phase)
251 to 300 ₹6.75 ₹220 ₹240
301 to 350 ₹7.60 ₹240 ₹250
351 to 400 ₹7.95 ₹260 ₹260
401 to 500 ₹8.25 ₹285 ₹285
Above 500 ₹9.20 ₹310 ₹310
Example: 300 units in a month (single phase):
300 × ₹6.75 = ₹2,025, plus ₹220 fixed = ₹2,245.

This is where the common misunderstanding is. Many people believe only the units above 250 are charged at the higher rate. They are not. Once you cross the line, all your units are repriced, including the cheap first 50.

What the jump looks like in rupees

These figures are energy charge plus fixed charge, single phase, before duty, fuel surcharge and meter rent. Duty and surcharge will push the gap a little higher.

Monthly units Total What it costs to go one unit higher
250 ₹1,592.50
251 ₹1,914.25 +₹321.75
300 ₹2,245.00
301 ₹2,527.60 +₹282.60
350 ₹2,900.00
351 ₹3,050.45 +₹150.45
400 ₹3,440.00
401 ₹3,593.25 +₹153.25
500 ₹4,410.00
501 ₹4,919.20 +₹509.20

The biggest jumps are at 250 and 500 units. The one at 500 is the worst. A home at 500 units a month (1,000 on a two-month bill) pays about ₹509 more for a single extra unit.

A more everyday case: using 260 units costs ₹1,975 before duty, against ₹1,592.50 at 250 units. Ten units of difference, about ₹382 on the bill.

Quick comparison

Telescopic Non-telescopic
Applies when Monthly average up to 250 units Monthly average above 250 units
How rate works Each block has its own rate One rate on all units
Fixed charge By highest slab reached By the band your total falls in
Effect of 1 extra unit Small, at the current block’s rate Can reprice your whole bill

What this means for you

Use the top of a band, not the bottom of the next one. Because the rate is the same all through a non-telescopic band, 300 units is a much better place to be than 301. Same for 350, 400 and 500. The first unit over any line is the most expensive unit you will ever buy.

Know your number before the meter reader does. Take your last bill, divide by two, and see how far you are from 200 or 250. If you are 5 or 10 units away, it is cheaper to cut that usage than to ignore it. A few hours less of AC or a geyser on a timer can be enough.

Watch the billing period. A bill covering more days than usual shows more units, and that can push your average over 250 even when your daily habits have not changed. If the dates look off, ask your section office.

Solar changes the slab, not just the units. With net metering, you are billed on net units (grid units used minus units exported). If solar brings your net average under 250, you move from the flat non-telescopic rate back to the telescopic slabs, so the saving is bigger than the units alone.

Quick answers

  • Is 250 a monthly or a two-month figure? It is monthly. On a two-month bill, the equivalent is 500 units.
  • Is exactly 250 telescopic? Yes. The non-telescopic method starts from 251.
  • Do duty and fuel surcharge apply on top? Yes. There is 10% electricity duty, a small fuel surcharge that changes from time to time, and meter rent (₹6 a month single phase, ₹15 three phase).
  • Is there a lower rate for very poor families? Yes, there is a special concessional rate (around ₹1.50 a unit with no fixed charge) for eligible very small BPL consumers. Check the eligibility conditions with your section office.

Rates can change

The slabs above are valid until 31 March 2027. KSEB and other entities are expected to file for the next five-year period by 30 November 2026, and the draft talks about changes such as demand-based fixed charges for homes. Nothing is final, so we will update this page when the new order comes.

You can try your own numbers on our KSEB bill calculator and see exactly where your bill falls before the next reading.

Note: Figures here exclude fuel surcharge, which varies. Your actual bill may differ slightly. For official rates, check the KSERC tariff order or kseb.in.

Leave a Comment

ML